Our pool lights seamlessly integrate into your existing pool structure. We offer two distinct types to match your needs:
Wall Mount Lights: Our wall mount lights offer a more comprehensive makeover, providing wider light distribution and enhanced design aesthetics. Choose from two control options, either RF signal remote control (standard wall mount) or using a Wi-FI enabled app on your smart phone or home device (SMART wall mount).
Screw-in Lights: Our screw-in type lights offer a quick and hassle-free upgrade. Choose from two control options, either RF signal remote control (standard and PRO pool and spa lights) or using a Wi-FI enabled app on your smart phone or home device (SMART pool and spa bulbs).
WALL MOUNT POOL LIGHT PRODUCTS
- Life-Bulb SMART wall mount pool light
- Life-Bulb STANDARD wall mount pool light
- Life-Bulb SMART wall mount spa light
Our wall mount pool lights are designed to replace your existing niche fixture that houses the bulb. Once the fixture is removed the bracket on the back of the light will screw into the niche set screw hole (as shown below). You will use the niche's set screw to attach the light bracket, not the light bracket screw. The cable will run through the back of the niche, then to either the control box or 12V transformer depending on which wall mount light you purchased. The wires will then connect to your main power source to the light. The light will mount onto the bracket and then sit flush on the pool wall surface.
PENTAIR NICHES - Common model numbers are 78232400, 78232500, 78210600 and 79206700
HAYWARD NICHES - Common models are Duraniche SP0600U, SP0606C1, Hayward SP0583
SCREW-IN TYPE LIGHT PRODUCTS
- Life-Bulb PRO pool light (120V)
- Life-Bulb PRO pool light (12V)
- Life-Bulb STANDARD pool light (120V)
- Life-Bulb STANDARD pool light (12V)
- Life-Bulb STANDARD spa light (120V)
- Life-Bulb STANDARD spa light (12V)
If your pool has a niche light fixture as shown below then our screw-in type lights will work. You will remove the lens cover of the light fixture to replace the existing bulb. Our pool and spa lights have an E26 medium screw in base, the same base as a standard household bulb. Our pool lights have a length of 5.375" and a diameter of 6.625". Our spa lights have a length of 3.625" and a diameter of 2.5". If your pool/spa fixture accepts this type of base and has a depth and opening large enough to accommodate our light, it will work in your pool/spa light fixture.